Hands-free light for working in the dark. Clips on and keeps your hands free.

White work light, red and blue warning flash, and three light sources on one button, in a 28-gram clip-on.

Three light sources: white, red and blue, plus a red/blue warning flash
Two white levels, 45 and 20 lumens, for ID checks and close work
Clips to a chest, shoulder or cap brim for true hands-free use
28 grams with the clip, so you forget it is there
Runs on 2 AAA batteries, alkaline or Ni-MH, swapped one-handed
Up to 28 hours of runtime on white low
IPX4 weatherproof, 1m impact resistant
Impact and low-temperature resistant PC body

Nitecore CL10 - white red and blue light for duty - Nitecore Singapore

White to work. Red and blue to be seen.

WHITE LIGHT at 45 or 20 lumens gives even, close-range illumination for checking identification, registering information and handling a task in the dark.

RED AND BLUE constant modes preserve night vision and signal your position. The red/blue warning flash marks you to traffic and colleagues when you are working roadside or on a cordon.

Three light sources cover the whole duty cycle, from quiet close work to high-visibility presence.

Nitecore CL10 - versatile clip chest shoulder cap brim - Nitecore Singapore

Clips where you need the light. Hands stay on the job.

The CL10 clips firmly to a chest pocket, a shoulder strap or a cap brim, aiming the light where you look while both hands stay free for the work in front of you.

The same clip guards the button, so the light stays off in a pocket or a bag instead of draining its batteries before your shift starts.

WHY THE CL10 OVER A HANDHELD OR A GENERIC CLIP LIGHT

Hands-free by design

It clips to your uniform and lights what you face. A handheld torch ties up a hand you need for notes, a radio or a subject.

White, red and blue in one

Work light, night-vision-friendly red, and a red/blue warning flash on a single button. Most clip lights give you white only.

28 grams you forget

Light enough to wear all shift without neck or collar fatigue, so it is on you and ready every time.

Batteries you already carry

Runs on common AAA cells, swapped one-handed through a side cap. No proprietary battery to charge before a callout.

Nitecore CL10 - single button operation light sources - Nitecore Singapore

One button for every mode.

A single textured button cycles the full set: 20-lumen white, 45-lumen white, red constant, blue constant, and the red/blue warning flash. Glove-friendly and easy to find by feel in the dark.

The raised, protruding button gives a clear, positive press so you change modes without looking down or fumbling at the wrong moment.

Nitecore CL10 - IPX4 weatherproof impact resistant - Nitecore Singapore

Fearless in rain and cold.

The body is moulded from a special PC plastic that resists impact and holds up in low temperatures, so a dropped light or a freezing roadside shift does not put it out of action.

IPX4 weatherproofing handles rain and spray, and 1-metre impact resistance covers the knocks of real duty use.

Nitecore CL10 - 2 AAA worry-free power side battery cap - Nitecore Singapore

Worry-free power on common AAA.

The CL10 runs on 2 AAA batteries, alkaline or Ni-MH, for up to 28 hours of white low. No charging cradle and no waiting before a shift, just batteries you can find anywhere.

A side battery cap pushes open with one hand, so you swap cells in seconds without removing the clip or taking the light off your uniform.

FOR HANDS-FREE WORK AFTER DARK

Security & Patrol

Clip it to a shoulder or cap brim for white work light, a red/blue presence, and ID checks, hours at a time without the weight.

EMS & Recovery

Medics and recovery crews keep both hands on the patient or the vehicle, with white light to work by and a warning flash to be seen.

Roadside & Marshalling

Traffic, events and utility crews mark their position with the red/blue flash while white light handles the close work.

Outdoors & Active

Campers, dog walkers and night riders get hands-free white light and a red marker that protects night vision and keeps you visible.

OUTPUT AND RUNTIME

MODE	LUMENS	RUNTIME	DISTANCE	INTENSITY
White High	45	15h	15m	59cd
White Low	20	28h	10m	23cd
Red Constant	5	17h	6m	9cd
Blue Constant	3	18h	4m	3cd
Red/Blue Warning Flash	5	17h	-	-

*Tested to ANSI/PLATO FL 1-2019

Measured with 2 × 1.5V alkaline AAA batteries. Real-world figures vary with battery type and conditions.

TECHNICAL SPECIFICATIONS

Light Sources	White / Red / Blue
Maximum Output	45 lumens
Maximum Throw	15 m
Peak Beam Intensity	59 cd
Maximum Runtime	28 h
Battery	2 × AAA (alkaline or Ni-MH)
Body Material	Impact-resistant PC plastic
Weather Resistance	IPX4
Impact Resistance	1 m
Dimensions	56.5 mm × 22.4 mm × 45.0 mm
Weight	28 g (clip included) / 51 g (with batteries)
Download Instruction Manual (PDF)

FREQUENTLY ASKED QUESTIONS

How do I reach the red and blue modes?

One button cycles every source in order: 20-lumen white, 45-lumen white, red constant, blue constant, then the red/blue warning flash. A short press steps to the next, so the whole set is available without a menu.

Where can I clip it?

The clip holds firmly on a chest pocket, a shoulder strap or a cap brim, aiming the beam where you look. It also covers the button to prevent accidental activation while stored.

Does it use a rechargeable battery?

The CL10 runs on 2 standard AAA batteries, alkaline or Ni-MH, so there is nothing to charge before a shift. A side cap opens with one hand for a quick swap, and a set of alkaline AAA is included.

Nitecore CL10 - multipurpose clip-on duty light - Nitecore Singapore

What's In The Box

1× Nitecore CL10 - multipurpose hands-free clip-on duty light
2× AAA Alkaline Batteries
1× Clip - for chest, shoulder or cap-brim carry

Clip it on. Keep your hands on the job.

GET YOUR CL10 NOW

AA battery lights

Price

Collections

CL10 - 45 lumens